Author Topic: Leaving cylinders loaded 8 monthe  (Read 695 times)

0 Members and 1 Guest are viewing this topic.

Offline Dresden

  • Jr. Member
  • **
  • Posts: 50
Leaving cylinders loaded 8 monthe
« on: May 06, 2019, 10:36:14 AM »
I loaded two cylinders Oct,18 and shot them May,19 I did forget to check the lube I use on the pin, first 5 shots were OK but the second 6 caused fouling problems on shot 5&6. Lubing the pin with my bees wax and coconut oil allows about 4 cylinders with no problem. I load my lube on a cardboard was punched out of wine case seperator cardboard. The lubed was is on top of the bullet no fouling or leading, one wipe with a damp rag cleans out most of the bore.
Target attached

Offline Mad Dog Stafford

  • The Forum Drunk!
  • Administrator
  • No Life Whatsoever!
  • *****
  • Posts: 24203
  • And away I go! What? Me worry? Nay!!!
Re: Leaving cylinders loaded 8 monthe
« Reply #1 on: May 06, 2019, 02:45:33 PM »
Hi Dresden, nice write up Bud.

Tombstone(not the pizza kind)
Heaven didn't want me and Hell was afraid I'll take over!

Offline Captainkirk

  • Forum Caesar, Administrator Extraordinaire, Part-Time Gunslinger, Savior of used and abused, and neglected Remmies
  • Administrator
  • Ultimate Forum Legend
  • *****
  • Posts: 8002
  • Black Powder Nut & Remmy fanatic
Re: Leaving cylinders loaded 8 monthe
« Reply #2 on: May 06, 2019, 06:14:30 PM »
Looks good. As long as there is no lube that can come in contact with the powder, you should be good for a while. Robert E. Lee's Navy Colt was fired 7 years after his death. The chamber mouths were sealed with beeswax.
"You gonna pull those pistols, or whistle Dixie?"