1858 remington forum

Author Topic: .45Colt (LC) Reloaded Too Long  (Read 1286 times)

0 Members and 1 Guest are viewing this topic.

Offline Captainkirk

  • Forum Caesar, Administrator Extraordinaire, Part-Time Gunslinger, Savior of used and abused, and neglected Remmies
  • Administrator
  • Ultimate Forum Legend
  • *****
  • Posts: 7863
  • Black Powder Nut & Remmy fanatic
Re: .45Colt (LC) Reloaded Too Long
« Reply #60 on: June 14, 2019, 01:49:23 PM »
I use the impact "puller" for most mistakes....powder, length, primer, etc. I have used the pliers method for the obstinate, hard to remove bullets. You can probably reload most of the impact-pulled bullets, but the pliers will mark the bullet (usually). For impact pulling, I use a short length of 4" X 4" pressure treated wood stood on end on my concrete basement floor. Once you get the technique down, you should be able to dislodge the bullet with one sharp snap of the wrist.

^^^^^^^^^^^^^This^^^^^^^^^^^^^^
"You gonna pull those pistols, or whistle Dixie?"

Offline necessaryevil

  • Hero Member
  • *****
  • Posts: 545
Re: .45Colt (LC) Reloaded Too Long
« Reply #61 on: June 14, 2019, 01:58:25 PM »
I can't remember where or when I saw it but I read an article where for an experiment they carved chunks out of handgun bullets and then reloaded them. It made virtually no difference to accuracy.
 

Offline Retreever

  • Jr. Member
  • **
  • Posts: 73
  • Life is too short to hunt with an ugly dog!
UPDATE Re: .45Colt (LC) Reloaded Too Long
« Reply #62 on: July 15, 2019, 09:00:02 AM »
So as I previously indicated I have disassembled all the 'too long' cartridges and based on comments from a few others  I am looking at re-using the bullets to reload. In addition I have acquired another 100+ bullets of the same type at no cost.

Yesterday I experimented with loading this bullet in a .45 Colt cartridge making sure not to exceed the max. overall length of 1.60 inches.

The attached pics show the result, is there any reason why these reloads would NOT be ok to shoot?

Thanks, Retreever
Management and Ops consulting pro providing tactical sales and business solutions. Gundog Trainer, Power Lifter Wannabe

Offline Mad Dog Stafford

  • The Forum Drunk!
  • Administrator
  • No Life Whatsoever!
  • *****
  • Posts: 24107
  • And away I go! What? Me worry? Nay!!!
Re: .45Colt (LC) Reloaded Too Long
« Reply #63 on: July 15, 2019, 10:00:09 AM »
Hi Retreever, shoot them...nothing wrong with them.
Tombstone(not the pizza kind)
Heaven didn't want me and Hell was afraid I'll take over!

Offline Captainkirk

  • Forum Caesar, Administrator Extraordinaire, Part-Time Gunslinger, Savior of used and abused, and neglected Remmies
  • Administrator
  • Ultimate Forum Legend
  • *****
  • Posts: 7863
  • Black Powder Nut & Remmy fanatic
Re: .45Colt (LC) Reloaded Too Long
« Reply #64 on: July 15, 2019, 10:39:39 AM »
What has changed so that now they are NOT too long? Seating depth?
"You gonna pull those pistols, or whistle Dixie?"

Offline Retreever

  • Jr. Member
  • **
  • Posts: 73
  • Life is too short to hunt with an ugly dog!
Re: .45Colt (LC) Reloaded Too Long
« Reply #65 on: July 15, 2019, 11:03:59 AM »
What has changed so that now they are NOT too long? Seating depth?

Hey Cap'n, as recommended I disassembled the original rounds that started this thread.

This past weekend I reloaded a single cartridge as an example of what I would need to do to stay inside the max. OAL of 1.60" for .45 Colt cartridge. As you surmised the 'Seating Depth' has been changed tf accomplish this.

Regards, Retreever
Management and Ops consulting pro providing tactical sales and business solutions. Gundog Trainer, Power Lifter Wannabe

Offline Captainkirk

  • Forum Caesar, Administrator Extraordinaire, Part-Time Gunslinger, Savior of used and abused, and neglected Remmies
  • Administrator
  • Ultimate Forum Legend
  • *****
  • Posts: 7863
  • Black Powder Nut & Remmy fanatic
Re: .45Colt (LC) Reloaded Too Long
« Reply #66 on: July 15, 2019, 11:07:16 AM »
In that case, then shoot away and enjoy!
"You gonna pull those pistols, or whistle Dixie?"

Offline Retreever

  • Jr. Member
  • **
  • Posts: 73
  • Life is too short to hunt with an ugly dog!
Re: .45Colt (LC) Reloaded Too Long
« Reply #67 on: July 15, 2019, 11:11:25 AM »
Side by Side comparison - the cartridge on the left is and example of the ones I 'inherited' and eventually disassembled. The cartridge on the right is the one I reloaded myself with the 'seating depth' adjusted to meet the OAL of 1.60".

Regards, Retreever
Management and Ops consulting pro providing tactical sales and business solutions. Gundog Trainer, Power Lifter Wannabe

Online Pustic

  • Ultimate Forum Legend
  • *******
  • Posts: 5806
  • Proud American Hillbilly Infidel & Facebook Felon
Re: .45Colt (LC) Reloaded Too Long
« Reply #68 on: July 15, 2019, 11:44:23 AM »
What is that gouge on the bullet from?  ???
{?( Be ye not afraid of the truth, for the "Truth Has No Agenda".  :9)
"If they come to take, they also come to die." Pustic 4:20


A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

Concealed carry, where you HIDE the exercise of your right to carry arms.

Offline Retreever

  • Jr. Member
  • **
  • Posts: 73
  • Life is too short to hunt with an ugly dog!
Re: .45Colt (LC) Reloaded Too Long
« Reply #69 on: July 15, 2019, 11:46:40 AM »
What is that gouge on the bullet from?  ???

Extraction from the original cartridge using the pliers method ->i

Retreever
Management and Ops consulting pro providing tactical sales and business solutions. Gundog Trainer, Power Lifter Wannabe

Offline Hewy

  • Hero Member
  • *****
  • Posts: 790
  • Black Friday
Re: .45Colt (LC) Reloaded Too Long
« Reply #70 on: July 15, 2019, 12:51:24 PM »
Did you verify the powder charge and the type of powder?
How did you seat the bullet back in the case?
Hewy
Hewy
Better to be gettin , than gettin got.

Offline Retreever

  • Jr. Member
  • **
  • Posts: 73
  • Life is too short to hunt with an ugly dog!
Re: .45Colt (LC) Reloaded Too Long
« Reply #71 on: July 15, 2019, 01:23:21 PM »
Did you verify the powder charge and the type of powder?
How did you seat the bullet back in the case?
Hewy

Hey Hewy, yes the new cartridge is my own reload using my own powder (Titegroup) and recommended median load for the bullet size.

I have a single station Lee reloading press and Lee .45 lc die set which I used to seat the bullet.

Thanks for checking.

Retreever
Management and Ops consulting pro providing tactical sales and business solutions. Gundog Trainer, Power Lifter Wannabe

Offline Captainkirk

  • Forum Caesar, Administrator Extraordinaire, Part-Time Gunslinger, Savior of used and abused, and neglected Remmies
  • Administrator
  • Ultimate Forum Legend
  • *****
  • Posts: 7863
  • Black Powder Nut & Remmy fanatic
Re: .45Colt (LC) Reloaded Too Long
« Reply #72 on: July 15, 2019, 07:21:34 PM »
Did you verify the powder charge and the type of powder?
How did you seat the bullet back in the case?
Hewy

Hey Hewy, yes the new cartridge is my own reload using my own powder (Titegroup) and recommended median load for the bullet size.

I have a single station Lee reloading press and Lee .45 lc die set which I used to seat the bullet.

Thanks for checking.

Retreever

I knew you wouldn't reuse that powder with all the crap we gave you about it... M__
"You gonna pull those pistols, or whistle Dixie?"